Now this, in my opinion, is effing brilliant. It really no-shit works, and like nothing else possibly could to add traction that can't be stopped.
From http://thereifixedit.failblog.org
Read more
From http://thereifixedit.failblog.org
0
Brilliant, immediate unstoppable traction in mud, also known as good horse sense, and farmer magic
0
Found in the first car of some young highschooler I bet... old cars didn't have cup holders I'm thinking... I never had anything made from 1973 to 1989, so I don't know. They aren't in my zone of interest.
I'm betting someone ends up in the emergency room
Sheesh these are lazy kids, is there anyone reading this that didn't put in years mowing lawns as a kid, before riding lawnmovers, self-propelled lawnmovers, and you think these kids could really use some time pushing a lawnmower?
real bad decisions caught on camera and shared with the rest of us to warn us of stupid ideas http://thereifixedit.failblog.org/
Read more
The website of "Stupid things people do to fix stuff" ThereiFixedit.failblog.com
Found in the first car of some young highschooler I bet... old cars didn't have cup holders I'm thinking... I never had anything made from 1973 to 1989, so I don't know. They aren't in my zone of interest. I'm betting someone ends up in the emergency room Sheesh these are lazy kids, is there anyone reading this that didn't put in years mowing lawns as a kid, before riding lawnmovers, self-propelled lawnmovers, and you think these kids could really use some time pushing a lawnmower? real bad decisions caught on camera and shared with the rest of us to warn us of stupid ideas http://thereifixedit.failblog.org/
0
story here: http://www.latimes.com/news/local/la-me-sand-dunes-20110221,0,4494274.story but in a nutshell they came to relate that motorized recreation fits into the Obama administration's "America's Great Outdoors " conservation initiative rolled out last week that is heavy on land preservation.
Read more
The US Interior Secretary and Director of the BLM toured the Imperial Sand Dunes at Glamis
story here: http://www.latimes.com/news/local/la-me-sand-dunes-20110221,0,4494274.story but in a nutshell they came to relate that motorized recreation fits into the Obama administration's "America's Great Outdoors " conservation initiative rolled out last week that is heavy on land preservation. great photo by Allen Schaben, shows the secretary in a ranger's sand rail that got stuck when they went to go over a steep dune... nice new rail huh?
0
The Caparo T1 is a British mid-engine, rear-wheel drive, two-seat automobile built by Caparo Vehicle Technologies, founded by design director Ben Scott-Geddes and engineering director Graham Halstead, engineers formerly involved in the development of the McLaren F1. The T1 was inspired by Formula One design, and intended as a relatively affordable street legal race car. The T1 was scheduled for production in mid-2007 for a price of GB£235,000 (approx. US$480,000 or €328,000, c.2007), with approximately 25 cars per year built.The T1 has a dry weight of 470 kilograms (1,000 lb), an overall length of 4,066 millimetres (160.1 in), an overall width of 1,990 millimetres (78 in), an overall height of 1,076 millimetres (42.4 in), and a wheelbase of 2,900 millimetres (110 in). It has a fuel tank capacity of 70 litres (18 U.S. gal). On November 11, 2007, the T1 surpassed the Top Gear Power Board leader's time of 1:17.6, then held by the Koenigsegg CCX, with a time of 1:10.6. Immediately after having declared the time and placed it on the Power Board, presenter Jeremy Clarkson removed the record because it did not meet the show's rule that the car must be able to go over a speed bump. However, Ben Scott-Geddes of Caparo has stated that, "the model we supplied to Top Gear was one of our final engineering vehicles without adjustable ride height and electronic active driver control systems which are standard on our production models. When drivers select the 'road' setting, the car is more tractable in slower speed conditions and the ride height is fully adjustable to bring the car up to 90 mm clearance, making it more than capable of driving over speed bumps."
The exterior of the T1 closely resembles that of a racing prototype or Formula One racing car. It features a carbon fibre aerodynamic low drag body design, composed of individual sections, with an adjustable twin element front wing, single element rear wing, and fowler flaps, and a ground effect diffuser, allowing it to create 875 kilograms (1,930 lb) of downforce at 240 kilometres per hour (150 mph). The wings are replaceable with road and track variations.The interior of the T1 is a two-seat configuration, lacking any amenities and luxuries to reduce excess weight. The passenger's seat is set back from the driver's seat slightly, allowing the seats to be placed closer together, thereby reducing the overall width of the T1. Offered are a head protection system, six-point harnesses for the driver and passenger, compatible with a HANS device, and is designed with a central safety cell made of a high-strength steel roll hoop with a fire system. The dashboard is multi-function with race data logging and speed sensors for traction control and launch control.The chassis of the T1 is composed of a carbon fibre and aluminium honeycomb monocoque with a front composite crash structure and a rear tubular space frame construction. The suspension is of a double wishbone design with tunable anti-roll bars, front and rear, and five-way adjustable race dampers. The braking system is composed of 355-millimetre (14.0 in) steel brake discs, with six-piston and four-piston callipers front and rear, respectively. The brake bias pedal box is fully adjustable and brake pads are available in various compounds. The wheels are all-aluminum 10-by-18-inch (250 by 460 mm) and 11-by-19-inch (280 by 480 mm) front and rear, respectively, with Pirelli P Zero Corsa tyres. Magnesium 10-by-18-inch (250 by 460 mm) and 11-by-18-inch (280 by 460 mm) wheels front and rear, respectively, with Pirelli slick and wet track tyres are available as optional equipment.
The T1 sports a 116-kilogram (260 lb), 32-valve, 3,496-cubic centimetre (3.5 L), all-aluminium, naturally-aspirated, Menard V8 engine with cylinder banks mounted at 90° and lubricated via a dry sump oil system. The engine has gone through several designs, previously including a smaller 2.4-litre supercharged unit. The production design generates a maximum power of 575 horsepower (429 kW; 583 PS) at 10,500 revolutions per minute and a maximum torque of 310 pound-feet (420 N·m) at 9,000 revolutions per minute, giving the car a power-to-weight ratio of 1,223 horsepower per tonne (912.8 kW/t). In addition, the engine has been reported to successfully reach 700 horsepower (520 kW; 710 PS) of power on methanol fuel. The engine is controlled via a fully tunable Pectel SQ6 engine control unit and the throttle is controlled via a throttle-by-wire system. The T1's gearbox is a 6-speed sequential made of a magnesium and carbon construction that has a variety of available gear ratios and utilizes a pneumatic actuator to shift, able to upshift in 60 milliseconds and downshift in 30 milliseconds. Furthermore, the drivetrain incorporates a limited slip differential and equal length hollow tripod driveshafts. The T1 has an estimated maximum speed of 205 miles per hour (330 km/h) on a low downforce setup. From a standing start, it has an estimated 0–100 kilometres per hour (0–62 mph) time under 2.5 seconds and onto 160 kilometres per hour (99 mph) in 4.9 seconds, depending on tyre setup. It is also capable of an estimated lateral acceleration of up to 3 g and braking deceleration of 3 g, depending on tyre setup. When driving the Caparo, Jeremy Clarkson, presenter of the British car show Top Gear, had stated that limited aerodynamic downforce is created at slow speeds. As a result, the car had low levels of lateral traction while cornering if it was not being driven rapidly. Aerodynamically, this vehicle is designed such that air passing over the body at high rates of speed "pushes" the vehicle against the road (allowing for higher cornering speeds). Clarkson criticized the handling characteristics proposing that if the vehicle was better at negotiating corners and bends in the track at higher speeds than at lower speeds. On a wet track or cold road surface, the slow speed handling would deteriorate further.
Read more
Caparo T1
The Caparo T1 is a British mid-engine, rear-wheel drive, two-seat automobile built by Caparo Vehicle Technologies, founded by design director Ben Scott-Geddes and engineering director Graham Halstead, engineers formerly involved in the development of the McLaren F1. The T1 was inspired by Formula One design, and intended as a relatively affordable street legal race car. The T1 was scheduled for production in mid-2007 for a price of GB£235,000 (approx. US$480,000 or €328,000, c.2007), with approximately 25 cars per year built.The T1 has a dry weight of 470 kilograms (1,000 lb), an overall length of 4,066 millimetres (160.1 in), an overall width of 1,990 millimetres (78 in), an overall height of 1,076 millimetres (42.4 in), and a wheelbase of 2,900 millimetres (110 in). It has a fuel tank capacity of 70 litres (18 U.S. gal). On November 11, 2007, the T1 surpassed the Top Gear Power Board leader's time of 1:17.6, then held by the Koenigsegg CCX, with a time of 1:10.6. Immediately after having declared the time and placed it on the Power Board, presenter Jeremy Clarkson removed the record because it did not meet the show's rule that the car must be able to go over a speed bump. However, Ben Scott-Geddes of Caparo has stated that, "the model we supplied to Top Gear was one of our final engineering vehicles without adjustable ride height and electronic active driver control systems which are standard on our production models. When drivers select the 'road' setting, the car is more tractable in slower speed conditions and the ride height is fully adjustable to bring the car up to 90 mm clearance, making it more than capable of driving over speed bumps."The exterior of the T1 closely resembles that of a racing prototype or Formula One racing car. It features a carbon fibre aerodynamic low drag body design, composed of individual sections, with an adjustable twin element front wing, single element rear wing, and fowler flaps, and a ground effect diffuser, allowing it to create 875 kilograms (1,930 lb) of downforce at 240 kilometres per hour (150 mph). The wings are replaceable with road and track variations.The interior of the T1 is a two-seat configuration, lacking any amenities and luxuries to reduce excess weight. The passenger's seat is set back from the driver's seat slightly, allowing the seats to be placed closer together, thereby reducing the overall width of the T1. Offered are a head protection system, six-point harnesses for the driver and passenger, compatible with a HANS device, and is designed with a central safety cell made of a high-strength steel roll hoop with a fire system. The dashboard is multi-function with race data logging and speed sensors for traction control and launch control.The chassis of the T1 is composed of a carbon fibre and aluminium honeycomb monocoque with a front composite crash structure and a rear tubular space frame construction. The suspension is of a double wishbone design with tunable anti-roll bars, front and rear, and five-way adjustable race dampers. The braking system is composed of 355-millimetre (14.0 in) steel brake discs, with six-piston and four-piston callipers front and rear, respectively. The brake bias pedal box is fully adjustable and brake pads are available in various compounds. The wheels are all-aluminum 10-by-18-inch (250 by 460 mm) and 11-by-19-inch (280 by 480 mm) front and rear, respectively, with Pirelli P Zero Corsa tyres. Magnesium 10-by-18-inch (250 by 460 mm) and 11-by-18-inch (280 by 460 mm) wheels front and rear, respectively, with Pirelli slick and wet track tyres are available as optional equipment.The T1 sports a 116-kilogram (260 lb), 32-valve, 3,496-cubic centimetre (3.5 L), all-aluminium, naturally-aspirated, Menard V8 engine with cylinder banks mounted at 90° and lubricated via a dry sump oil system. The engine has gone through several designs, previously including a smaller 2.4-litre supercharged unit. The production design generates a maximum power of 575 horsepower (429 kW; 583 PS) at 10,500 revolutions per minute and a maximum torque of 310 pound-feet (420 N·m) at 9,000 revolutions per minute, giving the car a power-to-weight ratio of 1,223 horsepower per tonne (912.8 kW/t). In addition, the engine has been reported to successfully reach 700 horsepower (520 kW; 710 PS) of power on methanol fuel. The engine is controlled via a fully tunable Pectel SQ6 engine control unit and the throttle is controlled via a throttle-by-wire system. The T1's gearbox is a 6-speed sequential made of a magnesium and carbon construction that has a variety of available gear ratios and utilizes a pneumatic actuator to shift, able to upshift in 60 milliseconds and downshift in 30 milliseconds. Furthermore, the drivetrain incorporates a limited slip differential and equal length hollow tripod driveshafts. The T1 has an estimated maximum speed of 205 miles per hour (330 km/h) on a low downforce setup. From a standing start, it has an estimated 0–100 kilometres per hour (0–62 mph) time under 2.5 seconds and onto 160 kilometres per hour (99 mph) in 4.9 seconds, depending on tyre setup. It is also capable of an estimated lateral acceleration of up to 3 g and braking deceleration of 3 g, depending on tyre setup. When driving the Caparo, Jeremy Clarkson, presenter of the British car show Top Gear, had stated that limited aerodynamic downforce is created at slow speeds. As a result, the car had low levels of lateral traction while cornering if it was not being driven rapidly. Aerodynamically, this vehicle is designed such that air passing over the body at high rates of speed "pushes" the vehicle against the road (allowing for higher cornering speeds). Clarkson criticized the handling characteristics proposing that if the vehicle was better at negotiating corners and bends in the track at higher speeds than at lower speeds. On a wet track or cold road surface, the slow speed handling would deteriorate further.
0
The Mariner (600 units) in Barbados blue with panels trim of simulated bleached teakwood planking accented by narrow black horizontal stripes and a "nautical anchor" medallion. The interior featured anchors and stars decorating dark blue suede bolster panels of the seats, which also had white piping and broad horizontal pleated inserts of medium blue antelope grain vinyl and was sold along the coastal regions of the United States.
Above, the Mariner
Designed to spur interest in all of AMC's products and to generate increased sales for the company, the special wagons were limited for sale to geographical areas.
Info from http://en.wikipedia.org/wiki/AMC_Rebel learned about it and got photos from
http://svammelsurium.blogg.se/2010/may/mariner-westener-briarcliff-rambler.html
Read more
1967 Rebel station wagon regional models
The Mariner (600 units) in Barbados blue with panels trim of simulated bleached teakwood planking accented by narrow black horizontal stripes and a "nautical anchor" medallion. The interior featured anchors and stars decorating dark blue suede bolster panels of the seats, which also had white piping and broad horizontal pleated inserts of medium blue antelope grain vinyl and was sold along the coastal regions of the United States. Above, the MarinerBelow the Westerner
The Westerner (500 units) in Frost White with plankwood trim side inserts and a "Pony Express" medallion. The interior featured stallion brown vinyl that simulated "richly tooled" leather on the seats and door panels in combination with white antelope grained vinyl and was available west of the Mississippi River.
The Briarcliff (400 units) in Matador Red with simulated black camera grain side panels and "regal" medallions, as well as its own black "antelope grain" vinyl interior. The Briarwood was marketed in major markets in the east and south.
The Westerner (500 units) in Frost White with plankwood trim side inserts and a "Pony Express" medallion. The interior featured stallion brown vinyl that simulated "richly tooled" leather on the seats and door panels in combination with white antelope grained vinyl and was available west of the Mississippi River.The Briarcliff (400 units) in Matador Red with simulated black camera grain side panels and "regal" medallions, as well as its own black "antelope grain" vinyl interior. The Briarwood was marketed in major markets in the east and south. Designed to spur interest in all of AMC's products and to generate increased sales for the company, the special wagons were limited for sale to geographical areas.
Info from http://en.wikipedia.org/wiki/AMC_Rebel learned about it and got photos from
http://svammelsurium.blogg.se/2010/may/mariner-westener-briarcliff-rambler.html
0
above via http://goawaygarage.blogspot.com/
Above from http://steampunkvehicles.tumblr.com/
In the above the cow catcher is missing
http://www.neverwashaul.com/ to see and learn all about it
All three of these were from different sites, and I've posted two of them before, but never together. The middle one is new to me, and from http://megamoto.tumblr.com/
the guy in charge is Major Catastrophe, and is interviewed here about what it's about: http://etheremporium.pbworks.com/w/page/10454244/Neverwas-Haul
Read more
the "NeverWas Haul" is the name of this vehicle at Burning Man
above via http://goawaygarage.blogspot.com/ Above from http://steampunkvehicles.tumblr.com/ In the above the cow catcher is missing http://www.neverwashaul.com/ to see and learn all about it All three of these were from different sites, and I've posted two of them before, but never together. The middle one is new to me, and from http://megamoto.tumblr.com/the guy in charge is Major Catastrophe, and is interviewed here about what it's about: http://etheremporium.pbworks.com/w/page/10454244/Neverwas-Haul
Subscribe to:
Comments (Atom)
